Intertek has conducted an evaluation for Omnitek Canada Ent. Inc. to determine the fire resistance characteristics of MGO Board Board MAGPLY Wall Assembly, model OMNIBOARD 10mm for a 1-hour fire-resistance rating with hose stream test.
The test was conducted in accordance with ASTM E119-20, Standard Test Methods for Fire Tests of Building Construction and Materials, and CAN/ULC S101-14, Standard Methods of Fire Endurance Tests of Building Construction and Materials.
OMNIBOARD APPLICATIONS:
Exterior Wall
OmniBoard magnesium cement boards are a fireproof sheathing design for exterior walls. It is made from reinforced Magnesium Oxysulfate cement, grade E mesh fibre, and waterproof polymers. OmniBoard is the leading chloride-free MgO board and has passed all the durability tests of EN 12467(fibre-cement sheathing standard). It is a fireproof and cost-effective sheathing, highly recommend for tile, brick, stone veneer substrate, ETICS underlay, aluminum curtain wall substrate and stucco substrate etc.
Interior Wall
OmniBoard magnesium cement board is an ideal interior wall application in high moisture and wet areas like the kitchen and bathroom. OmniBoard is a fire-resistant wallboard that has passed the ASTM E119 and has proven to be a 1-hour fire-rated building material. OmniBoard is also water-resistant and mould-resistant, which is a much better building material than OSB or Gypsum board in wet and high moisture areas. We provide tapered edge and square edge boards for easy installation.
Ceiling and Floor Board
OmniBoard is ideal for use in interior ceilings and sub-floor board applications. Using a 10mm thickness board for the ceiling and a 19mm thickness board for the sub-floor board can give you a 2-hour fire separation. OmniBoard is good for fire-resistance, water-resistance and sound insulation. We offer tapered edge, square edge, and tongue & groove edge boards for easy installation.
PRODUCT PROPERTIES:
Fire Resistance
- Incombustible Class A1
- Flame spread None Class A
- Smoke emission None Class A
Moisture Resistance
- Waterproof coating surface
- Maintains high strength in wet condition
Mould Resistance
- Resistant to mould
- Resistant to fungus
Pest Resistance
-
OmniBoard with a steel frame structure provides 100% termite and pest resistance
Impact Resistance
- OmniBoard reinforced with mesh glass fiber provides structural resistance
- Hammer Pounding
- Panel Drops
- Edge Impact
Thermal Resistance
- OmniBoard has a low heat transfer rate which is much lower than most inorganic building materials, 0.218(M2.K)/W
Flexible
- A 12mm thickness OmniBoard has a bending strength of over 1350N
Durable
- Pass 50 times soak & dry cycles
- Pass 50 times heat rain cycles
- Pass 100 times frezze-thaw
SIP Sheathing
- 40-60 minutes fire protection
- Screw holding > 700-900N
- High bending & impact strength
Easy Installation
- Utility knife cutting, sawing, nailing, drilling
- Plasteringand painting same as gypsum board and fiber cement board.
Building Safe
- Resistant to fire, water, mould, and termites
- 20 years factory warranty with "No Metal Corrosion"
ECO & Safe
- Abestos and formaldehyde free
- Materials Safety meets European REACH regulation
AVAILABLE SIZES:
Exterior Board
For outdoor and indoor uses
Thickness: 3/8” (10mm)/ 1/2” (12mm)/ 3/4” (19mm)
Width: 4' (1220mm)
Length: 8’ (2440mm)/ 9’ (2740mm) / 10’ (3050mm)
Custom size also available
Ceiling Board
For indoor uses
Thickness: 15/64” (6mm)/ 3/8” (10mm)
Width: 4' (1220mm)
Length: 8’ (2440mm)/ 9’ (2740mm) / 10’ (3050mm)
Custom size also available
Interior Board
For indoor uses
Thickness: 3/8” (10mm)/ 1/2” (12mm)
Width: 4' / 1220mm
Length: 8’ (2440mm)/ 9’ (2740mm) / 10’ (3050mm)
Custom size also available
Floor Board
For outdoor and indoor uses
Thickness: 3/4” (19mm)
Width: 4' (1220mm)
Length: 8’ (2440mm)/ 9’ (2740mm) / 10’ (3050mm)
Custom size also available